Samsung is all set to introduce the all-new Galaxy Tab S7+ & Galaxy Tab S7 alongside with Galaxy Note20 series. Previously we had spotted the Galaxy Tab S7+ passing through Geekbench and various other certification. Now we have finally spotted the base version aka Galaxy Tab S7 passing through Geekbench.
As per the source, the alleged Galaxy Tab S7 is been listed as SM-T870 which is running on Android 10 out of the box. The Galaxy Tab S7 secured impressive 4509 under single and 12945 under multi-core test. The Galaxy Tab S7 is again powered by same SD865 SoC coupled with 6GB RAM and probably come with 128GB storage.
As per previous leaks, the Galaxy Tab S7 will sport lower 11 inches 120Hz refresh rate display with 7760 mAh battery. It also comes with 5G support out of the box.
Further, the popular tipster has just leaked the first 3D CAD renders of the new Galaxy Tab S7+. After leaking the base version aka Galaxy Tab S7 renders we finally have the top-end model with Galaxy Tab S7+. The new Galaxy Tab S7+ looks identical to the previously leaked Galaxy Tab S7 but with slightly higher dimensions.
Yes, there is only change in dimension for the new Galaxy Tab S7+ which is of 285 x 185 x 5.7mm. This indirectly confirms that the device is taller than the predecessor Galaxy Tab S6. As per the source, the Galaxy Tab S7+ sports 12.4 inches display with thinner bezels.
The power button along with volume rockers on the right of the device. The speaker mesh is on both the top and bottom of the device. There is just a USB Type-C port on the bottom of the device. On the back, the Galaxy Tab S7+ again features dual-rear cameras with LED flash and magnetic S-Pen holder below it. There are antenna bands running on the top and bottom of the device.
